Wards
Yamaha
YBA
30078, 30211, 30013
30354, 30143, 30133, 30504
31502
Qisheng
Quasar
RadioShack
RCA
31609, 31390
30039
31263
31023, 31609, 31254, 30346, 30531,
31154, 31511, 30080, 30530, 31074,
31390, 30054, 30360
30195, 30181, 30163
31437
31869, 31383
31519
31500, 31295
30189, 30346, 30193, 31089
30801, 30360, 31469, 30219, 31251
30163, 30322
NSC
Oak
00063, 00156
00019, 00007
00021
01877, 00237
00000, 00008, 00107, 00040, 00021
00637
00000
00317, 00027, 00025, 00153, 00013,
00031, 01305
01877, 00877, 00144, 00533, 01021
Luxman
LXI
Magnavox
Marantz
Mark Levinson 31484
McIntosh
MCS
Miro
Mission
MTC
Nakamichi
NEC
Nikko
30093
30305
A-BUS “All off ” command
A-BUS “sleep” command
If your device does not respond to the remote after
trying all codes listed for your brand, or if your
brand is not listed, try searching for your code:
above, or the Troubleshooting tips below, before
beginning again at step 1.
ALL
OFF
Optimus
Pace
Panasonic
Panther
Paragon
Philips
30157, 30305
30626, 30029, 30157, 30180
7. To program another key for the same source,
repeat steps 5-6. To program another device, repeat
steps 1-6. Press and hold SETUP to exit program-
ming.
1. Press a device key once.
Setup Codes for Audio Amp/Tuners
A-SRC1
2. Press and hold SETUP until the red LED
blinks twice, then release.
SLEEP
ADC
Adcom
Aiwa
30531
31616, 30616, 31617
31405, 30158, 30189, 31243, 31089,
31388, 30121, 30405, 31321, 31641, 31347
30224, 30076, 31512, 31255
31390
30287
30029, 30043
30000
30157
30420, 30625
30147
30043, 30234
30174, 30170, 30164, 30625
30157
A-BUS® LEARNING &
Realistic
Regent
Rio
Deleting a single learning key
PRE-PROGRAMMED REMOTE CONTROL
3. Enter 9-9-1, then the device group number
(see below). The LED blinks twice.
Skip backward, rewind,
1. Select a source.
Saba
USER GUIDE
Akai
Alco
Pioneer
Popular Mechanics 00400
Pulsar
Quasar
RadioShack
RCA
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
fast forward, skip forward,
stop pause, or play tracks
on disc.
0
Cable (Cable Converters,
Video Accessories, Satellite
Receivers)
2. Press and hold SETUP until the LED flashed
twice.
Samsung
Sansui
Sanyo
Scott
Amphion Media Works 31615, 31563
AMW
Anam
Apex Digital
Arcam
Audiophase
Audiotronic
Audiovox
AVLight
Bel Canto Design 31584
Bose
Brix
Cambridge Soundworks 31477, 31370
Capetronic
Carver
Casio
Clarinette
Classic
00000
00000
NOTE: If more than 15 seconds passes between key
presses, the remote exits programming.
31563, 31615
31609, 31074, 30281
31430, 31257
31120
31387
31189
1
2
3
TV (TVs)
00015, 00883, 00797, 00315
00021
00207
00400
00279, 00273, 00259, 00020
00002
00011
00000
NSM
Onkyo
Optimus
Sharp
31286, 30186, 31386, 31361
VCR (VCRs, DVD players)
3. Press 9 7 6.
30868, 30101
Use Page Up/Down with cable or
satellite boxes. Note: May have to
learn in these functions.
Sharper Image 31545, 31556, 30797, 31409, 31416,
31549, 31385, 31411, 31546, 31723,
31263, 31410
Sherwood
Shinco
Shinsonic
Silsonic
Sonic
Sonic Blue
Sony
31063, 30000, 30032, 30037, 30342,
30437, 31075, 30145, 30194, 30305,
30426, 30087, 30179, 30280, 30420,
30468, 30175, 30196
30029, 30752, 30303
30420, 30194
Audio (Audio Amplifiers,
Audio Amp/Tuners,
CD players)
4. Press the key (twice) containing the learned
function to be deleted. The remote blinks twice.
30491, 31423, 30062, 31077, 30502, 31653
31390
31426
30176, 31426
30281
5. Repeat steps 2-4 for another key on the same
source, or press and hold SETUP to exit program-
ming.
31390, 31627
30158
Issues CCTV1 or CCTV2 command.
4. Aim the remote at the device and press
POWER. The remote sends IR codes from its library
to the selected device, starting with the most popu-
lar code first. If the device responds, go to step 6.
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
QED
Quad
Quasar
RadioShack
RCA
30626, 30157, 30287
31063, 31062, 30032, 30305, 30468, 31087
31229, 31253, 30639
31602
Samsung
00000, 00144, 00040
View the current channel and
program information.
Deleting all learned keys in a specific mode
Scientific Atlanta 01877, 00877, 00477, 00008, 00017
Seam
Signal
Signature
SL Marx
Sony
1. Press and hold SETUP until the LED blinks
twice.
31383, 31869, 31532
30157
30157
30157
30157
30029
31075
00510
00040, 00015
00011
00040
01006
5. If the device does not respond, press CH+. the
remote will try the next code. Continue until the
device responds. Press CH- to try the previous code.
31058, 31441, 31258, 31759, 30158,
31442, 31529, 31758, 31371, 31503,
31042, 31658, 31158, 31858, 31367,
31406, 31458, 30168, 31558, 31131,
31349, 31382
Display the menu for the selected device.
30531
Note: if more than 15 seconds pass between key
presses, the remote exits programming.
31189, 30189, 30042, 31089, 30008, 30360
30195
30195
31352
31513, 31389, 31263
31136
31420
6. Press SETUP to lock in code. To search for
other device codes, repeat steps 1-5.
Exit the selected device’s menu, guide, or
program without making a menu selection.
2. Press 9 7 6.
ALL
ON
OFF
SLEEP
OFF
Sprucer
Starcom
Stargate
Starquest
Supercable
Supermax
Sylvania
Tandy
Teleview
Texscan
TFC
Timeless
Tocom
Torx
Toshiba
Trans PX
Tristar
TS
Tusa
TV86
00021
ZONE
Soundesign
Stereophonics 31023
Sunfire
Tae Kwang
Teac
30670
3. Press a device key twice (S1 - S6) to delete all
the learned keys for that mode. The LED blinks
twice.
DISC
31062, 30032, 30305, 30764, 30179,
30468, 30009, 30155, 30420, 30053
30164, 30180, 30155, 30179, 30175, 30420
30157, 30420
30157
30157, 30305, 30202
30179, 30087
30157
30305, 30164, 30155
30305
30861, 30037, 30180
31067, 30196, 30180, 30426
30043
Coby
00003, 00014, 00015
00015, 00797, 00040
00015
00276
00883
00001
00258
00040
00001
00310
00040
00012, 00013
00003
00000
00276, 00153, 00315
00883
00003
00015
00063
CHECKING THE CODES
Display the program guide for the selected
device.
Compaq
Criterion
Curtis
Curtis Mathes 30080
Daewoo
Dell
31313, 30314, 30313, 31052
30440
30163, 31267, 31074, 31528, 30463, 31390
31308, 31518, 30039, 30518, 30309,
31309, 30208
30281
31189
31390, 30849
30074
Realistic
Rotel
SAE
Sansui
Sanyo
SAST
Scott
Sears
Sharp
Sherwood
Shure
Silsonic
If you have set up the remote using the procedure in
“Searching for Your Code,” you may need to find out
which five-digit code is operating your equipment.
For example, to find out which code is assigned to
your TV:
4. Repeat steps 1-3 for another set of keys for a
device, or press and hold SETUP to exit program-
ming
31596
Change inputs on selected device.
INTRODUCTION
Technics
31250
31383
The A-SRC1 Remote Control is designed for use with
the Russound A-BUS A-C68 controller and system
keypads (A-KP3, A-K5L and A-KSC). It is designed
to operate source devices and the audio system key-
pads. The A-SRC1 controls up to seven devices (six
A-BUS sources and one local source). For best
results, please read and follow all the remaining
instructions and keep this guide for future reference.
Techwood
Thorens
Venturer
Victor
Wards
Yamaha
Press LAST once to recall the last channel
and to page back one screen in the main
menu.
TROUBLESHOOTING
Denon
31360, 30004, 31104, 30771, 31311,
30273, 31142, 30301
1. Press the S# key to which the TV is assigned.
Problem: Remote does not control devices or commands are
not working properly.
Dynamic Bass 30360
Emerson
Fisher
2. Press and hold SETUP until the red LED
blinks twice, then release.
30424, 30255
31409, 30360, 30219, 31801, 30042
31360
31487
30424, 30281, 30463, 30146, 30440
31517, 31567
31379
31263
31532
Third-party command. Note: may have to
learn in this function.
30158, 30189, 30080, 30054
30176, 30081, 31176, 31375, 30186,
31331, 31276
Solution: Try all listed codes for the device. make sure the
device operates with an infrared remote control.
3. Enter 9 9 0. The LED blinks twice.
Fonmix
Fosgate
Garrard
Gateway
GE
Glory Horse
Go Video
GoldStar
GPX
4. To view the code’s first digit, press 1. Count the
LED blinks (e.g., three blinks =3), and enter the
number in the appropriate device list in step 6 of
“Programming a Device.” If a code digit is 0, the
LED does not blink.
30888, 30036
Directly enter channels (e.g., 09
or 31). Press OK to send
channel number entries on
some TV models.
Yorx
Zenith
30195
ADDITIONAL INFORMATION
Sonic Frontiers 30157
Sony
31293, 30857, 30281, 31869
30490, 30000, 31364, 30185, 30605,
FEATURES AND FUNCTIONS
The A-SRC1 does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to the A-SRC1.
30100, 30604
30425, 30145
30018
Setup Codes for Cable Converters
Soundesign
STS
Symphonic
TAG McLaren 30157
Tascam
TDK
Teac
Technics
Tivoli Audio
ABC
00003, 00008, 00014, 00001, 00007,
00013, 00011, 00017
00315, 00153
00899
00207, 00022
00797, 00207, 00153, 00022
00056
00014
00899
00056
00022
00022
00153
00315, 00153
00883
00883
00025, 00031
00040
00019
Note: S1 - S6,Vol +/-, Mute and Power are system
commands and are the same for any source.All
other buttons are dependent upon the device code
associated with the source and may vary from
device to device.
5. Repeat step 4 for the remaining digits, using 2
for the second digit, and so on.
30305
Allegro
Russound is not responsible for typographical errors or
omissions.A-BUS is a registered trademark of
LeisureTech Electronics Pty Ltd Australia
30281
31299
30146
INSTALLING BATTERIES
Unika
00207, 00153, 00022
Americast
Antronix
Archer
United Artists 00007
Universal
V2
Viewmaster
Viewstar
Vision
Vortex View
Zenith
6. To check for other device codes, repeat
steps 1-5, using the appropriate S# key.
30420
31208
1. On the back of the A-SRC1, push the tab and lift
off the battery cover.
Hafler
00153, 00056, 00207, 00022, 00191
00883
00883
00063, 00027, 00258
00883
00883
00000, 00525, 00899
00400
Harman/Kardon 30110, 30189, 30891
Hewlett Packard 31181
Hitachi
Initial
Inkel
Integra
JBL
JVC
Copyright ©2007 Russound, Inc.
30393, 30180, 30174, 30420
30029, 30207, 30303
31553
The following Key Charts provide a general descrip-
tion of button functions.
Belcor
2. Obtain two (2) fully-charged AA alkaline bat-
teries. Match the + and – marks on the batter-
ies to the + and – marks in the battery case,
then insert the new batteries.
Russound, 5 Forbes Road, Newmarket, NH 03857
USING LEARNING
Bell & Howell
Bell South
Cable Star
Cabletenna
Cableview
Century
Citizen
Clearmaster
ClearMax
Colour Voice
Comtronics
Contec
Coolmax
Daeryung
Digi
Director
Dumont
Eastern
Emerson
Everquest
Focus
Funai
Garrard
GC Electronics 00207, 00056
Gehua
Gemini
31801, 31273
31426
The A-SRC1 includes a Learning feature so you can
add functions that are unique to your home enter-
tainment devices (e.g.,VCR Tracking Up or Down).
The following precautions apply.
28-1257
03/27/07
Key Charts
Vector Research 30194, 30417
30027, 30062, 30502, 30491
30135, 31298
30110, 31306, 30281
30074, 31282, 31263, 31495, 31374
30440
31313, 31570, 31569, 30027, 31051,
30077, 30313, 31027, 30042, 30239,
30569, 31052, 30186, 30314
31412, 31390, 31428
30424, 30255, 31366
31798, 31510
31437
Victor
Wards
Yamaha
YBA
Yorx
Zonda
30072
30157, 30053
30888, 30036, 30187, 30170, 31292
30625
30461
30157
Select an A-BUS
device. Issues an S#
command and
MANUFACTURER’S CODES
3. Press the battery cover back into place. The tab
should click when the cover is locked.
Zentek
Setup Codes for Audio Amplifiers
Setup Codes for CD Players
• The original remote controls must be in working
order for learning to work properly.
4. Test the unit by pressing Power and any mode
key. If the batteries are inserted correctly, the
LED will blink once.
Kansai
Kenwood
changes the mode of
the remote to
control the source.
ADC
30018
Accuphase
Acurus
30382
30765
Adcom
Aiwa
Akai
Audio Alchemy 30194
Audio-Technica 30170
BSR
Burmester
California Audio Labs 30029, 30303
Carrera
Carver
Classic
Crown
DAK
DBX
Denon
DKK
DMX Electronics 30157
Dynamic Bass 30179
Emerson
Fisher
Garrard
GE
Gemini
Genexxa
GoldStar
GPX
30155, 30234
30157, 30124, 30012
30156
• Learned keys are mode specific, so each one can
store a unique function for each mode.
Adcom
Aiwa
31100, 30577
30406
Setup Codes for DVD Players
KLH
Koss
PROGRAMMING A DEVICE
Toggle the selected A-BUS zone power on
or off. Has talkback LED for programming
and confirmation.
• Do not use the following keys for learning: Device
Keys, SETUP, BACK, or Record.
Adcom
Advent
Aiwa
Akai
Allegro
21094
21016
AudioSource
30011
Bel Canto Design 31583
Lasonic
Lenoxx
Lexicon
Linn
Liquid Video
Lloyd's
LXI
Note: S1 - S6,Vol +/-, Mute and Power are system
commands and are the same for any source.All
other buttons are dependent upon the device code
associated with the source.
00883
20641, 21912
20899, 20770, 21975, 21089
20869
30245, 30194
30420
• Learning capacity is approximately 40 to 100 keys,
depending on the code being learned.
Bose
30674
01877, 00877, 00477, 00008
00637
00476
00637
00002
00797
00040, 00015
00400
00019
00153
Carver
Classe
30269
31461, 31462
31076
30189
31497
30195
Program sequences.
• Certain device codes are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
Amphion Media Works 22016, 22001
AMW
Anam
Apex Digital
30194
30157, 30437, 30179
31297
30122
30245
30254
30873, 30003
30000
Curtis Mathes 30300
Before proceeding, find the codes for the devices you
want to program in, under “Manufacturer’s Codes”
in this manual. To control Universal TV,VCR or
DVD, Cable or Satellite Receivers, Amplifier or Tuner,
and Auxiliary devices, follow these steps.
20872, 22016, 22001, 21176
21913
20672, 20717, 20797, 21020, 21100,
20796, 21004, 21061, 21937, 20794,
20830, 21056, 21915, 20755
21168
20736
21071, 21122, 21041, 21121, 21072
21071, 21072
20662, 20655
Denon
Durabrand
GE
30160
31561
30078
Select next/previous.
Select the next/previous chapter on some
models of DVD players.
30181
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient flu-
orescent lights.
Magnavox
31189, 31269, 30189, 30128, 30391,
30195, 31089, 31514, 30531
31189, 31269, 30039, 30189, 31089,
31289, 30200, 30128
30039, 30346
31596
31393
30195
31089
30320
Harman/Kardon 30892
Marantz
Press LAST to recall the last-viewed channel.
JVC
30331
Aspire Digital
Audiologic
Audiovox
Axion
B & K
Bel Canto Design 21571
Blaupunkt
Blue Parade
Broksonic
Cambridge Soundworks 21916
CAVS
Changhong
CineVision
Classic
Coby
Criterion
Kenwood
Korsun
Left Coast
Lenoxx
Linn
30356
31483
30892
31561
1. Turn on the device (e.g., DVD
player) and if needed, load media.
• Have the original remote controls handy before
programming learning.
Raise or lower the sound level.
Press MUTE to turn the sound off or on.
MCS
Memorex
Mitsubishi
Modulaire
Musicmagic
NAD
Nakamichi
NEC
Norcent
Onkyo
00476
00797, 00015
2. Press a device key (S1 - S6).
Programming a learned key
3. Press and hold SETUP until the red LED
blinks twice, then release.
Note: If more than 15 seconds pass between key
presses, the remote exits programming.
30305, 30164, 30155, 30469
30179, 30174, 31325, 30088, 30342
30245, 30420, 30393, 30280, 30425
30009
30625
30032, 30305, 30164
30417
30269
General Instrument 00476, 00810, 00276, 00003, 00014,
00011, 00015
Global
GMI
GoldStar
Goodmind
Hamlin
Hitachi
Hytex
Logitech
Luxman
Magnavox
Marantz
31408
30165
30269
30892, 30321, 30269
20717
20571
20868, 20695
Select local source.
01327
4. Enter the first five-digit code for your
device.The LED blinks once as each digit is entered.
If the code is valid, the LED blinks twice.
1. Press and hold SETUP until LED flashes twice.
2. Press 9 7 5.
30347, 30097, 31555
30235
31389
00015, 00797
00144, 00040
00797
00009, 00273, 00034, 00020, 00259
00014, 00011
00007
00015, 00315, 00153
00400
00476, 00810, 00276, 00003, 00012,
00014, 00011, 00015
00015
00144, 00040
00440
00027
3. Press a device key once (e.g., S1 - S6) to assign
a mode for learning.
Input (prefix) command for track,
DISC
Mark Levinson 31483
Note: If the LED does not blink twice, repeat steps 2
to 4 and try entering the code again.
21057
20627, 21061
20876, 20869
21917
20778, 21107, 21086, 21923, 20852, 21165
22007
30135, 31298, 30842, 30380, 31531
channel, etc.
Nakamichi
NEC
30321
30264
Optimus
31023, 30801, 31074, 30080, 30186,
30531, 30797, 30042, 30181, 30440,
30738, 30849, 30177, 30219, 30670
4. Place the A-SRC1 head-to-head (about 2”
apart) from your original remote control.Also locate
the key (on original remote control) that will serve
as the teaching function.
31296
5. Aim the remote at the device and press a
function button. The device should in turn perform
the requested function. If it does not, repeat steps
3-5, trying each code for your brand until you find a
code that works. If you cannot find a code that
works see “Searching for Your Code” in this manual.
Harman/Kardon 30157, 30173, 31202, 30426
Hitachi
Inkel
Integra
JVC
Kenwood
Optimus
Panasonic
Parasound
Philips
Pioneer
Polk Audio
PS Audio
RCA
30395, 30300
30521, 30308
30246
30892, 30269
30013, 30300
30892, 30269
31523
30032, 30155
30196, 30180, 30437
30101
30072, 31294, 30655
30681, 30826, 30626, 30028, 30037,
30036, 30190
31318
30287
31484
31317
30157
30018
31208
30157
Jasco
Jebsee
Jerrold
Move the cursor in menu screens.
Oritron
Panasonic
31497, 31366
31518, 30039, 31548, 31764, 30518,
31350, 31763, 30367, 31316, 31509,
31633, 30309, 31288, 31363
30195
31390
31189, 31269, 30189, 31365, 31089,
31266, 31283, 30891, 31368, 30391,
31120, 31268
31023, 30150, 30630, 31184, 30080,
30531, 31084, 31384, 30244,31343
5. On the A-SRC1, press a key where the learned
function will be stored.
Curtis Mathes 21087
CyberHome
Daewoo
Denon
21023, 21129, 20816, 21117, 21024
20784, 20869, 20833, 21918, 21172, 20705
20490, 20634
21085, 21068
20521
20591, 20675, 20821
20591
20670, 21919
20675
21077, 21073, 21158
20522, 20815, 20717
Leon
LG
Linsay
Magnavox
Memorex
Motorola
Movie Time
MS
Penney
Philco
Philips
Press OK to choose the high-lighted menu
option. Performs “Enter” function for
devices.
6. On the original remote, press and hold the the
key to be learned. The A-SRC1 LED will turn
off.Continue holding the key on the original remote
until the A-SRC1 LED blinks twice.
6. Repeat steps 1-5 for the other devices you
want to control. For future reference, write down
each working device code.
KLH
30300
Dual
Kodak
Korsun
Koss
Krell
Kyocera
LG
Realistic
Sansui
30395
30321
DVD2000
Emerson
Enterprise
Fisher
Funai
Gateway
GE
00000
Press Enter to choose the high-lighted
menu option. Performs“OK”function
(suffix command) for devices.
00476, 00810, 00276, 01254, 01106, 01376
00156, 00063
00015
00012
00618
Pioneer
Shure
30264
Note: If the LED displays one long blink, a learning
error has occurred. Try repeating this step again
until a successful capture occurs. If the function is
still not captured, press and hold SETUP to exit pro-
gramming. Review the learning precautions listed
SEARCHING FOR YOUR CODE
Sony
30689, 30220, 30815
30078, 30211
30521, 30308
30331
Polaroid
Polk Audio
Proscan
31508
30189, 31289
31254
Soundesign
Technics
Victor
Note: S1 - S6,Vol +/-, Mute and Power are the same
for any source.All other buttons are dependent upon
the device code associated with the source.
MultiVision
Novaplex
A-BUS “on” and “off” commands.
ON
OFF
Linn
|